COMPOUND 4 – REGULAR CLEANING – PRECIOUS METALS

Description

Application:

This is a regular cleaning compound to be used with a polishing buff to clean

precious

metals:

• Silver
• Platinum
• Gold

How to use the compounds and the buffing pads:

1. The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten

   the correct buffing pad in the adaptor. Make sure the flanges are on both

   sides of the buffing pad.

2. It would be best to use a drill press to polish metals. If a drill press

   is not accessable, use adaptor

   TCV01810 with a portable drill with a collar

   diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.

3. The buffing pad should revolve towards you at full speed. Pass the

   compound lightly across the face of the buffing pad. To ensure that the

   compound is evenly spread, hold a clean piece of scrap metal against the

   face of the buffing pad. This will eliminate lumps of compound from

   occuring.

4. If desired, heat the item to 65°C using an oven or a heater. Warming

   the metal keeps the compound on the buffing pad. A cool item will draw

   compound from the pad and leave deposits. Use a glove to handle the warm

   item.

5. Hold the metal lightly against the buffing pad. Allow the compound to do

   the work.

6. If more compound is required, apply it using a wiping motion. Do not

   overload the buffing pad.

Use Tork Craft’s line of buffing pads and compounds to clean, polish and

bring to a high gloss, all metals and plastics.